B-Quiet VComp Mass Loaded Vinyl Sound Absorbing Mat Barrier

FEATURES: Mass Loaded Vinyl Sound Absorbing mat Extremely strong and can be walked on.

Each Sheet Measures 54″ X 36″ For A Total Of 13.5 Sq. Ft. Per Sheet.
Total Thickness Of 3/8″ Superior Sound Absorption High Stretch and Contouring Ability Water-Resistant Material Reduces Temperatures from Exhaust or sun Improves Quality of Any Audio System Easy to Install

Product Type: Mass Loaded Vinyl (MLV) Composite Sound Barrier
Brand: B-Quiet
Primary Use: Airborne noise blocking in vehicles, equipment enclosures, walls, ceilings, and industrial applications

Construction
1. Mass Layer: 1 lb per square foot (1 lb/ft²) high-density Mass Loaded Vinyl
2. Decoupler Layer: Closed-cell foam backing
3. Composite Design: Barrier + decoupling layer bonded together

Physical Properties
1. Weight: 1 lb per square foot
2. Thickness: Approx. 1/4" (varies slightly due to composite structure)
3. Color: Black
4. Flexible: Yes – conforms to contours

Performance
Designed to significantly reduce airborne noise transmission

Effective for:
1. Engine and road noise
2. HVAC and mechanical noise
3. Generator and equipment enclosures
4. Wall and ceiling sound blocking

VComp works best when used as a barrier layer, typically installed over damping material or inside wall/vehicle cavities.

SHIPPING POLICY

All orders ship from our warehouse in Denver, Colorado, USA.
Orders placed before 2:00 PM (Monday–Friday) ship the same business day. Orders placed after 2:00 PM ship the next business day.

United States:
1. Free economy shipping on orders over $100 within the Continental U.S. (5–7 business days via UPS or FedEx).
2. Express 2–3 business day shipping is available for an additional fee.

Canada:
1. Flat rate shipping of $30 per order.
2. Orders shipped to Canada may incur customs duties, tariffs, taxes, or brokerage fees, determined by local authorities. These charges are not included in your order total and are the recipient's responsibility, payable before or upon delivery.

Mexico:
1. Flat rate shipping of $50 per order.
2. Orders may incur customs duties, taxes, or import fees, determined by local authorities. These charges are not included in your order total and are the recipient's responsibility, payable before or upon delivery.

International Shipping:
We offer international shipping. If your address is not available at checkout, please contact us at service@b-quiet.com for assistance.

B-Quiet Ultimate/Extreme Sound Deadener Installation Instructions:-

1. The surface you are applying the B-Quiet Ultimate/Extreme to, should be clean of dust, moisture, grease and other foreign materials.

2. Measure and cut off a piece of B-Quiet Ultimate/Extreme using scissors or a utility knife. Don't cut pieces too small, as it'll just take longer to apply. Keeping the pieces around a square foot will speed the process greatly.

3. Heating B-Quiet Ultimate/Extreme (with a heat gun or hair-dryer) before applying is not required as is the case with many other deadeners. As long as it is applied at or above room temperature, it will form a very strong bond.

4. Peel the paper backing off, and slowly lay the material down inch by inch. Take your time and slowly push the material into the contours of the panels.

5. Remember to mark off any clip holes and/or screw holes that will be covered, so you can cut them out as soon as a sheet has been applied.

B-Quiet Vcomp application instructions:-

1. Always apply the foam side of Vcomp towards the source of the noise

 2. Use a knife or scissors to cut Vcomp to the required size

3. If applying to anything other than the floor of a vehicle, a spray adhesive will be needed to secure the Vcomp to the panel. Follow the directions on the spray adhesive can for best results.

 4. Press Vcomp firmly into place

 5. For optimum noise reduction, use in conjunction with one of our damping products (the damping material should be installed first, followed by Vcomp over top)

 B-Quiet Hliner application instructions:-

 1. Use a knife or scissors to cut Hliner to the required size before removing the backing to expose the adhesive.

 2. Thoroughly clean the surface to ensure it's free of moisture, dust, oil/grease or other foreign materials.

 3. Remove the paper backing to expose the adhesive

 4. Bend Hliner slightly and attach it to the panel. Slowly apply inch by inch until it's completely attached 

5. Go over the entire surface of Hliner and ensure that it's been firmly pressed into place

We love our product and are confident you will too! We stand behind what we sell and will not rest until you are satisfied with your installation.