Side By Side Sound Deadening Package

$233.20

$274.36

B-Quiet Sound Deadening's side by side sound deadening package is designed to significantly reduce the noise from your side by side's engine and transmission, providing a quieter driving experience

Excellent Thermal Insulation & Sound-Proofing
High Stretch and Contouring Ability
Perfect Gift Package for Any SBS Enthusiast

B-Quiet Ultimate/Extreme Sound Deadener Installation Instructions:-

1. The surface you are applying the B-Quiet Ultimate/Extreme to, should be clean of dust, moisture, grease and other foreign materials.

2. Measure and cut off a piece of B-Quiet Ultimate/Extreme using scissors or a utility knife. Don't cut pieces too small, as it'll just take longer to apply. Keeping the pieces around a square foot will speed the process greatly.

3. Heating B-Quiet Ultimate/Extreme (with a heat gun or hair-dryer) before applying is not required as is the case with many other deadeners. As long as it is applied at or above room temperature, it will form a very strong bond.

4. Peel the paper backing off, and slowly lay the material down inch by inch. Take your time and slowly push the material into the contours of the panels.

5. Remember to mark off any clip holes and/or screw holes that will be covered, so you can cut them out as soon as a sheet has been applied.

B-Quiet Vcomp application instructions:-

1. Always apply the foam side of Vcomp towards the source of the noise

2. Use a knife or scissors to cut Vcomp to the required size

3. If applying to anything other than the floor of a vehicle, a spray adhesive will be needed to secure the Vcomp to the panel. Follow the directions on the spray adhesive can for best results.

4. Press Vcomp firmly into place

5. For optimum noise reduction, use in conjunction with one of our damping products (the damping material should be installed first, followed by Vcomp over top)

B-Quiet Hliner application instructions:-

1. Use a knife or scissors to cut Hliner to the required size before removing the backing to expose the adhesive.

2. Thoroughly clean the surface to ensure it's free of moisture, dust, oil/grease or other foreign materials.

3. Remove the paper backing to expose the adhesive

4. Bend Hliner slightly and attach it to the panel. Slowly apply inch by inch until it's completely attached

5. Go over the entire surface of Hliner and ensure that it's been firmly pressed into place

Fast Delivery

Premium Quality

Secure Payment

Satisfaction Garanteed

Features Of The Side By Side Sound Deadening Package

Excellent thermal insulation properties

In addition to reducing noise, the sound deadening package also provides excellent thermal insulation. It helps to regulate the temperature inside the side by side, enhancing overall comfort during hot or cold weather conditions.

Pressure and Water Resistant

The materials used in the package are designed to withstand pressure and resist water, ensuring durability and longevity.

Effective soundproofing

The combination of the B-Quiet Ultimate Butyl Sound Deadener, VComp Mass Loaded Vinyl, and HLiner sheets offers effective soundproofing capabilities. It minimizes vibrations and sound waves, preventing them from entering the cabin, and creating a quieter environment.

Flame retardant for safety

All the sound deadening materials used in the package are flame retardant, ensuring safety in case of fire or accidents.

Side By Side Sound Deadening Package

By using B-Quiet Sound Deadening's industry-leading products, you can effectively reduce vibrations, sound waves, and engine noise, transforming your side by side into a quieter and more enjoyable ride.

Nasa SLS model modellino aerospaziale sls

Side By Side Sound Deadening Package includes the following components

Roll of 50 sq ft B-Quiet Ultimate Butyl Sound Deadener: This sound deadener is applied first on the back of the firewall, effectively reducing vibrations and sound waves.
Sheets of B-Quiet VComp Mass Loaded Vinyl: These sheets are applied over the B-Quiet Ultimate Butyl Sound Deadener to the back firewall. The mass loaded vinyl further enhances soundproofing capabilities.
Sheet of HLiner: This sheet is specifically designed for use in the engine compartment and is mounted between the engine and the firewall. It helps to reduce engine noise and improve sound insulation.

Customers' Reviews

Why Side By Side Sound Deadening Package?

Find out why you should choose The Side By Side Sound Deadening Package insted of others.

Ours

Others

Made in The USA

Water Resistant

Easy to Install

Water-Resistant

Temperature Control

Revolutionize Your Side by Side!

Transform your side by side with our industry-leading sound deadening. By removing the vibrations, and sound waves, B-Quiet Sound Deadening will make your side by side much quieter. Universal cut to fit for all manufacturers such as Polaris, Can-Am

Enhances driving comfort

By reducing noise and vibrations, the side by side sound deadening package greatly enhances driving comfort. It allows you to enjoy conversations with passengers or listen to music without the interference of excessive engine or transmission noise.

Haven’t used it yet but was surprised at how fast it came and packaging great job B-Quiet

Road Noise Greatly Reduced

The road noise in my 2009 Toyota Matrix S has been greatly reduced and we only did the rear hatch and the floor. We plan on doing the doors and the roof in the near future.

1974 Ford step on van adjusting !

Finally using the purchased insulation and sound proofing materials and realizing what a difference! Cut down the cold transfer on the floor dramatic and able to insulate under 3/8 ha to Hardie back and a thin sheet of aluminum sheeting to keep the insulation sturdy and not fall into the floors ridges for plans of circulation air for moisture.saved alot of head room . Thank you Fraser good product and to mention the Fraser River , good flow .
m.d.r.

Delivery is really late

I still haven't receive the product .i was told 3 days and now im being I'm being told over 7 ???i called thursday aug 1 with the order

Received B-Quiet today

This material is of high quality and I'm looking forward to applying it to the automobile. It has good sticking
properties. It certainly appears to be good for sound suppresion. It is as described by the Vender.

1 2 3