B-Quiet HLiner Heat and Sound Insulation 13.5SQ.FT - B-Quiet

B-Quiet HLiner Heat and Sound Insulation 13.5SQ.FT

$98.00

$108.89

The B-Quiet HLiner Heat and Sound Insulation is a high-quality product designed to provide both heat reduction and sound dampening for various applications

Thick Thermo-Acoustic Foam with Aluminum Skin
Self-adhesive to Stick to Any Surface
Durable and race-tested

B-Quiet Ultimate/Extreme Sound Deadener Installation Instructions:-

1. The surface you are applying the B-Quiet Ultimate/Extreme to, should be clean of dust, moisture, grease and other foreign materials.

2. Measure and cut off a piece of B-Quiet Ultimate/Extreme using scissors or a utility knife. Don't cut pieces too small, as it'll just take longer to apply. Keeping the pieces around a square foot will speed the process greatly.

3. Heating B-Quiet Ultimate/Extreme (with a heat gun or hair-dryer) before applying is not required as is the case with many other deadeners. As long as it is applied at or above room temperature, it will form a very strong bond.

4. Peel the paper backing off, and slowly lay the material down inch by inch. Take your time and slowly push the material into the contours of the panels.

5. Remember to mark off any clip holes and/or screw holes that will be covered, so you can cut them out as soon as a sheet has been applied.

B-Quiet Vcomp application instructions:-

1. Always apply the foam side of Vcomp towards the source of the noise

2. Use a knife or scissors to cut Vcomp to the required size

3. If applying to anything other than the floor of a vehicle, a spray adhesive will be needed to secure the Vcomp to the panel. Follow the directions on the spray adhesive can for best results.

4. Press Vcomp firmly into place

5. For optimum noise reduction, use in conjunction with one of our damping products (the damping material should be installed first, followed by Vcomp over top)

B-Quiet Hliner application instructions:-

1. Use a knife or scissors to cut Hliner to the required size before removing the backing to expose the adhesive.

2. Thoroughly clean the surface to ensure it's free of moisture, dust, oil/grease or other foreign materials.

3. Remove the paper backing to expose the adhesive

4. Bend Hliner slightly and attach it to the panel. Slowly apply inch by inch until it's completely attached

5. Go over the entire surface of Hliner and ensure that it's been firmly pressed into place

Fast Delivery

Premium Quality

Secure Payment

Satisfaction Guaranteed

features of the B-Quiet HLiner Heat And Sound Insulation

Thermo-Acoustic Foam

The insulation is made from a thick layer of thermo-acoustic foam, which effectively absorbs and dampens sound vibrations. This helps reduce unwanted noise and improves sound quality inside the vehicle.

Self-Adhesive Backing

The insulation features a self-adhesive backing, making it easy to install on any surface. Simply peel off the backing and stick the insulation onto the desired area without the need for additional adhesives.

HLiner Heat and Sound Insulation_117_Tif.jpg__PID:ba578dd2-ac62-4003-a554-6f5a90361ab4

Aluminum Skin

The foam is reinforced with an aluminum skin, adding durability and heat resistance to the insulation. The aluminum layer helps deflect heat away from the engine or other heat sources, keeping the interior cooler.

Versatile Application

The insulation can be used in various applications, including campervan conversions, truck cabins, doghouse insulation, underhood insulation, firewall insulation, generator compartments, and boat engine bays. It is also suitable for insulating walls and ceilings, reducing heat transfer from the sun.

Premium Insulation for Comfortable Rides

The B-Quiet HLiner Heat and Sound Insulation is more than enough to keep your car rides quiet and cool in the summer and warm in the winter. A thick thermo-acoustic foam, reinforced with an aluminum skin, this mat dampens engine noise, while also deflecting heat from the engine. For truckers, this is more than a blessing on the road! In a Camper Van application, it helps insulate the walls and ceiling, by reducing the sun's heat from entering the interior of the van.

shutterstock_2196741669.jpg__PID:b170aeb7-212e-4f94-8753-393798dccee2

HLiner Heat and Sound Insulation_127_rev.jpg__PID:6ec22149-ac1f-4f93-b9e9-3f45c79e22fc

Why B-Quiet HLiner Heat And Sound Insulation

Thick Thermo-Acoustic Foam with Aluminum Skin
Self-adhesive to Stick to Any Surface
Highly effective heat reduction and sound dampening
Perfect for campervan conversions, doghouse insulation and underhood, firewall Insulation
Deflects Heat to reduce interior temperatures from the engine or sun
Durable and race-tested
Can be installed within 6 Inches of an exhaust manifold.
Each sheet measures 54″ X 36″ for a total of 13.5 Sq. Ft. Per Sheet.
Total Thickness Of 1/2″
Easy to Install

Customers' Reviews

Why Choose B-Quiet HLiner

Find out why you should choose B-Quiet HLiner Heat And Sound Insulation instead of others

Ours

Others

Premium Quality

Durable and Race-Tested

Easy to Install

Aluminum Skin

Temperature Control

k_Tif.jpg__PID:ac624003-6554-4f5a-9036-1ab483c22a39

Easy Installation

The flexibility of the insulation allows it to conform to different shapes, curves, and surfaces easily. It can be cut to the desired length and shape without hassle. The self-adhesive backing ensures a secure and straightforward installation process.

Great product, Fast ship, VERY easy To Apply!

It Works!

It does what it needs to.

Fantastic product and service

Great product and service.

Great!

Fantastic product and quick service!

Haven’t used it yet but was surprised at how fast it came and packaging great job B-Quiet

1 2 3

Easy Inclusion, Engagement
and Belonging
for the Workplace