B-Quiet VComp Mass Loaded Vinyl Sound Absorbing Mat Barrier - B-Quiet

B-Quiet VComp Mass Loaded Vinyl Sound Absorbing Mat Barrier

$90.74

The B-Quiet VComp Mass Loaded Vinyl Sound Absorbing Mat Barrier is a high-quality product designed to reduce unwanted vehicle noise and improve audio quality.

Mass Loaded Vinyl Sound Absorbing mat
Extremely strong and can be walked on.
Superior Sound Absorption

B-Quiet Ultimate/Extreme Sound Deadener Installation Instructions:-

1. The surface you are applying the B-Quiet Ultimate/Extreme to, should be clean of dust, moisture, grease and other foreign materials.

2. Measure and cut off a piece of B-Quiet Ultimate/Extreme using scissors or a utility knife. Don't cut pieces too small, as it'll just take longer to apply. Keeping the pieces around a square foot will speed the process greatly.

3. Heating B-Quiet Ultimate/Extreme (with a heat gun or hair-dryer) before applying is not required as is the case with many other deadeners. As long as it is applied at or above room temperature, it will form a very strong bond.

4. Peel the paper backing off, and slowly lay the material down inch by inch. Take your time and slowly push the material into the contours of the panels.

5. Remember to mark off any clip holes and/or screw holes that will be covered, so you can cut them out as soon as a sheet has been applied.

B-Quiet Vcomp application instructions:-

1. Always apply the foam side of Vcomp towards the source of the noise

2. Use a knife or scissors to cut Vcomp to the required size

3. If applying to anything other than the floor of a vehicle, a spray adhesive will be needed to secure the Vcomp to the panel. Follow the directions on the spray adhesive can for best results.

4. Press Vcomp firmly into place

5. For optimum noise reduction, use in conjunction with one of our damping products (the damping material should be installed first, followed by Vcomp over top)

B-Quiet Hliner application instructions:-

1. Use a knife or scissors to cut Hliner to the required size before removing the backing to expose the adhesive.

2. Thoroughly clean the surface to ensure it's free of moisture, dust, oil/grease or other foreign materials.

3. Remove the paper backing to expose the adhesive

4. Bend Hliner slightly and attach it to the panel. Slowly apply inch by inch until it's completely attached

5. Go over the entire surface of Hliner and ensure that it's been firmly pressed into place

Fast Delivery

Premium Quality

Secure Payment

30 Days Moneyback

features of the B-Quiet VComp Mass Loaded Vinyl Sound Absorbing Mat Barrier

Mass Loaded Vinyl

The mat is made of mass loaded vinyl, which is a dense and heavy material specifically designed to block and absorb sound waves. This helps to minimize road noise, engine noise, and car rattles, resulting in a quieter and more enjoyable driving experience.

High Stretch and Contouring Ability

The mat has high stretch and contouring abilities, allowing it to conform to irregular surfaces and shapes. This makes it easier to install on different parts of the vehicle and ensures maximum coverage for optimal noise reduction.

Walkable and Durable

The mat is extremely strong and can be walked on without getting damaged. This makes it suitable for installation on floors, doors, firewalls, and other areas where noise needs to be blocked.

Water-Resistant

The mat is made from a water-resistant material, which helps protect it from moisture and ensures long-lasting performance. It can withstand exposure to different weather conditions without deteriorating or losing its sound-absorbing properties.

Enhance Driving Bliss with VComp: The Ultimate Sound Absorbing Solution

Improve your driving experience by reducing unwanted vehicle noise with B-Quiet VComp Sound Absorbing Mat Barrier. VComp minimizes road noise, engine noise, and car rattles to make your ride more serene and fun! A noise barrier composite consisting of a dense 1/8″ vinyl-based polymer barrier with a 1/4″ thick foam decoupler, this sound dampener absorbs unwanted sounds from vehicles and improves audio quality. Tear-resistant long-lasting, and easy to cut and install, it withstands all extreme temperatures with no odor! This is a perfect material made to be installed on floors, doors, firewalls, and any other areas to block noise. Expertly crafted with high-quality material, this noise absorber brings warmth and serenity to your space

Nasa SLS model modellino aerospaziale sls

Why B-Quiet VComp Mass Loaded Vinyl Sound Absorbing Mat Barrier

Mass Loaded Vinyl Sound Absorbing mat
Extremely strong and can be walked on.
Each Sheet Measures 54″ X 36″ For A Total Of 13.5 Sq. Ft. Per Sheet.
Total Thickness Of 3/8″
Superior Sound Absorption
High Stretch and Contouring Ability
Water-Resistant Material
Reduces Temperatures from Exhaust or sun
Improves Quality of Any Audio System
Easy to Install

Customers' Reviews

Why B-Quiet VComp So Specials

Find out why you should choose B-Quiet VComp instead of others

Ours

Others

Made in The USA

Walkable and Durable

Easy to Install

Water-Resistant

Temperature Control

Temperature Reduction

The mat also helps reduce temperatures from exhaust or sun exposure. By blocking heat transfer and insulating the vehicle's interior, it contributes to a more comfortable driving experience, particularly in hot weather conditions.

Easy to Install

The mat is designed for easy installation. It can be cut and shaped to fit specific areas using simple tools. Its tear-resistant nature ensures durability during the installation process and long-term use.

Road Noise Greatly Reduced

The road noise in my 2009 Toyota Matrix S has been greatly reduced and we only did the rear hatch and the floor. We plan on doing the doors and the roof in the near future.

1974 Ford step on van adjusting !

Finally using the purchased insulation and sound proofing materials and realizing what a difference! Cut down the cold transfer on the floor dramatic and able to insulate under 3/8 ha to Hardie back and a thin sheet of aluminum sheeting to keep the insulation sturdy and not fall into the floors ridges for plans of circulation air for moisture.saved alot of head room . Thank you Fraser good product and to mention the Fraser River , good flow .
m.d.r.

Delivery is really late

I still haven't receive the product .i was told 3 days and now im being I'm being told over 7 ???i called thursday aug 1 with the order

Received B-Quiet today

This material is of high quality and I'm looking forward to applying it to the automobile. It has good sticking
properties. It certainly appears to be good for sound suppresion. It is as described by the Vender.

Sound deadener for side by side

Looks like good materials. I would give it 5 stars if it came with installation instructions of any kind.

1 2 3