The Dodge Charger is a classic muscle car, with edgy lines and sporty wheels. With a Hemi V8 engine, the Dodge Charger is smooth and powerful, not to mention fun to drive. But with all that power comes a lot of noise. Engine, road, and tire noise are the problem and can be significantly more pronounced when accelerating. Adding sound deadening materials is a simple upgrade that enhances comfort without taking away performance. With the right approach, you can turn your Charger into a quieter, cooler, and more refined car.
Applying B-Quiet Ultimate Sound Deadener to your Dodge Charger
To correctly insulate and sound deaden your Dodge Charger, B-Quiet.com recommends applying Ultimate Automotive Sound Deadener to the roof, trunk, body panels, doors, and floor of your Dodge Charger.
Ultimate can be applied to the roof and floor of your Dodge Charger, by removing the seats, carpet, and the roof liner and applying the peel and stick sound dampening material to all metal surfaces. This process is simple and will only take about 3-4 hours.
Ultimate can also be applied to the body panels, doors and in the trunk of your Dodge Charger. You simply remove the interior panels and apply Ultimate to the door skin, the doors and in the trunk.
If you really want to go all out, you can also apply B-Quiet HLiner under the hood of your Dodge Charger, behind the fire wall and transmission tunnel for increased automotive sound insulation.
How Much Material Do You Need?
Depending on the model year and trim, a Dodge Charger requires between 100 -130 sq ft of sound deadening for full coverage.
- Start with the floor and trunk for the biggest improvement.
- Add the doors and firewall to block wind and engine noise.
- Finish with the roof and body panels for maximum comfort.
Use our Sound Deadening Calculator for a custom estimate based on your Charger.
DIY Installation Tips
- Prep the surfaces: Remove carpet, seats, and panels. Clean thoroughly with degreaser or isopropyl alcohol.
- Apply Ultimate first: Cut into 1 sq ft sections and stick to the floor, doors, trunk, and body panels. Use a roller to ensure full adhesion.
- Install HLiner: Place on the roof or hood liner to reduce airborne noise and heat transfer.
- Reassemble the interior: Put everything back in place and enjoy the difference.
Package Recommendation
The Ultimate Sound Deadening Package is designed to fit vehicles like the Dodge Charger. Each package includes B-Quiet Ultimate, VComp, Hliner, and an application roller, giving you everything needed for DIY installation.
